Vermont Energy Control Systems

Products

Vesta System Components

A Vesta system can contain many different components in addition to the Vesta Controller. The diagram at right shows some of the components that might be used in a typical installation:

We provide technical support before and after purchase. If you have any questions about the Vesta system or how it could be used in your application, contact us via email at or by telephone or text at 614-918-VECS (614-918-8327).

VSC-4 Vesta System Controller

The Vesta System Controller is the heart of the Vesta system. It includes a wall-mounted power supply and provides the following capabilities:

  • 16 analog (sensor) inputs
  • 4 variable speed control outputs
  • 32 discrete (contact closure sensing) inputs
  • 32 discrete outputs (LED, relay control)
  • Built-in web server
  • Ethernet network port
  • All required software

Price: $975.00

RM-1206 Relay Module

The standard Vesta relay module contains four relays capable of controlling pumps, valves, motors, or other electrical loads. Connection to the Vesta System Controller is accomplished with a standard Ethernet-style cable. The relays have DPDT (double pole / double throw) contacts allowing each relay to either turn on or off two independent circuits when activated. The RM-1206 is packaged in a standard 4" electrical job box.

The RM-1206 is rated for 8A momentary and 3A continuous current per relay contact. This is suitable for most small pumps, fans, circulators, and lights.

Price: $95.00

TS-1058-25 Temperature Sensor

The TS-1058-25 is the standard temperature sensor for the Vesta system. It can measure temperatures from -20°F to 212°F. Up to 16 sensors can be connected to a single Vesta controller. The TS-1058-25 comes standard with a 25' cable. Other lengths available on request.

Price: $20.00

VS-1108 Variable Speed Control Unit

The VS-1108 is an external control unit that allows the Vesta system to turn a single-speed fan, blower, or circulator into a variable speed device. The Vesta System Controller can drive up to four VS-1108 units. The VS-1108 is packaged in a standard 4" electrical job box. The VS-1108 works with a wide range of devices. Contact Vermont Energy Control Systems to ensure compatibility with your application.

Price: $80.00

DB-1195 Vesta Discrete Breakout Box

Discrete inputs and outputs on the Vesta System Controller are provided via standard Ethernet-style connectors, each carrying four channels. The DB-1195 provides a simple way to make connections to system discrete inputs or outputs. The DB-1195 is packaged in a standard 3.5" electrical job box.

Price: $35.00

SB-1061 Sensor Breakout Box

Note: This item is not currently available. A new version is in the development pipeline and should be available soon. Please contact us if you are interested in this product.

The SB-1061 Sensor Breakout Box can reduce the number of long sensor cables required when multiple sensors are used in a remote location. Up to four sensors can be connected to the SB-1061. The SB-1061 is then connected to the Vesta controller using a single Cat5 (Ethernet type) cable.

TC-1125 Thermocouple Amplifier

Note: This item is not currently available. A new version is in the development pipeline and should be available soon. Please contact us if you are interested in this product.

Thermocouples are useful for measuring high temperatures in hostile environments. The Vesta system uses type K thermocouples which can measure temperatures up to 2500°F. These are often used to measure boiler combustion temperature, kiln temperature, or flue temperature.

The electrical signal provided by thermocouples is very small, so thermocouple cables are typically very short. The TC-1125 Thermocouple Amplifier is mounted near the point where the thermoucouples are installed. It supports up to two thermocouples, and is connected to the Vesta controller using standard four conductor sensor cable.


© Vermont Energy Control Systems LLC